Noise floor of -117dBm/Hz at 1GHz has extreme sensitivity for picking up weak signals
Auto Sequence mode allows users to define their own macros in 10 Sequence sets
Easy-to-use interface
PC connection is effortless and versatile supporting USB host/device, RS232C, and VGA
Performs numerous measurements, such as Adjacent Channel Power Ratio (ACPR), Occupied Bandwidth (OCBW), Channel Power, N-dB, and Phase Jitter
2 year warranty
More About this Item
With a low noise floor, the GSP-830 is extremely capable of finding limits. The GSP-830 can act as an automatic test instrument to eliminate the need for external computer control. Macros can be defined through the front panel keypad and stored into 10 Sequence sets. A sequence can include pause steps that can be used for observing the measurement results when necessary. Repeat or Single run mode can be selected based on application requirements.
Equipped with two packs of Li-ion batteries, the GSP-830 can maintain normal operation for more than 3 hours. In DC operation mode, the GSP-830 can be powered by a 12-Volt power supply or a standard cigarette lighter in an automobile. The large internal memory of the GSP-830 means mass storage of measured traces, setup information, limit lines and user-defined macros is possible. Weighing only 13 lbs. and compact in size — 13" x 6 11/16" x 13 3/8" , the GSP-830 is also a convenient tool for service engineers out in the field.
A high-resolution 6.4" color TFT LCD provides crisp and clear images. Colored, user-defined traces allow small disparities to be seen at a glance. The Split-Window mode allows simultaneous monitoring of two different frequency bands on a single display. The USB host port on the front panel supports flash drives for various functions, including loading/saving setup information, tracing data, and capturing screens. The rear panel USB slave port is used for PC remote control. The GSP-830''s screen image can be sent directly to external monitors through the VGA port on the rear panel.
Through RS-232 or USB connection, the free software called EagleShot can transfer measurement data from the GSP-830 to a PC. The rear panel USB slave port is used for PC remote control. Data can be printed as graphs or saved as a text file for further analysis.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.